WhatsApp
+62818-0847-5888
Work Hours
Monday to Friday: 9AM - 5PM
PT Sebatek Prima Tunggal manufactures polyester webbing slings at its own facility in Citeureup, Bogor Regency. Weaving, sewing, coloring, and quality control are all handled in-house, which means width, capacity, and length are built to project requirements rather than limited to available stock. Webbing slings are used to lift loads with surfaces that scratch or dent easily. The polyester weave distributes pressure more evenly than chain or wire rope, and the lower weight speeds up rigging in the field. We supply volume and OEM requirements for contractors, port operators, manufacturing plants, and oil & gas projects.
Total control over production. From webbing looming to final quality control, every stage runs inside our own facility in Citeureup, Bogor Regency.
See our manufacturing facilities.
| Working Load Limit | Width | Color Code | Color |
|---|---|---|---|
| 1 Ton | 30 mm | Violet | |
| 2 Ton | 60 mm | Green | |
| 3 Ton | 90 mm | Yellow | |
| 4 Ton | 120 mm | Grey | |
| 5 Ton | 150 mm | Red | |
| 6 Ton | 180 mm | Brown | |
| 8 Ton | 240 mm | Blue | |
| 10 Ton | 300 mm | Orange |
Color coding follows EN 1492-1, allowing capacity to be identified on sight without reading the label. Custom widths and lengths available on request.
Yes. All webbing slings are produced in-house, so width, working load limit, and length are built to your specification rather than limited to stock sizes. Send us your load requirement and configuration.
Our color coding follows EN 1492-1, the European standard for flat woven webbing slings. Capacity can be identified by color without reading the label. Certification documents are available on request.
Sebatek webbing slings are produced at a 7:1 safety factor, meaning breaking strength is seven times the working load limit. Other safety factors can be arranged for specific project requirements.
Yes. We supply volume and OEM requirements for contractors, port operators, manufacturing plants, and oil & gas projects. Lead time depends on quantity and configuration.
Webbing slings distribute pressure across a flat surface, which suits loads that scratch or dent easily. Round slings are more flexible and conform better to irregular shapes. Our technical team can advise based on your load and rigging setup.
All production runs at our own facility in Citeureup, Bogor Regency, from webbing looming through sewing, coloring, and final quality control.
PT Sebatek Prima Tunggal is a webbing sling manufacturer in Indonesia, producing synthetic slings from high tenacity polyester at our facility in Citeureup, Bogor Regency,
Table of Contents 1. Why Webbing Sling Failures Matter 2. Understanding How Webbing Slings Fail 3. 7 Common Failure Types 4. Hidden Damage Indicators 5.
Most lifting incidents do not happen because someone ignored the rules. They happen because someone followed a rule they did not fully understand. The webbing
Sling failure is not an “oops moment.” When a sling breaks during a lift, the consequences are immediate dropped loads, potential fatalities, equipment damage, and
Choosing between polyester and nylon is a technical decision based on physics and environmental chemistry. Picking the wrong one doesn’t just shorten the sling’s life;
(7:1 Safety Factor, Color Code & Inspection Guide) Safety Factor, Color Code & Compliance Guide for Engineers, Safety Officers, and Procurement Teams EN 1492-1 is
Every year, rigging failures cause serious injuries and fatalities on job sites around the world. Most of them are preventable. A lot of incidents trace
Webbing slings are among the most widely used lifting tools in construction, logistics, manufacturing, and heavy industry. They are flexible, lightweight, and capable of handling
Kenapa Alat Angkat Industri Butuh Safety Maksimal Keselamatan kerja di industri konstruksi, manufaktur, dan logistik tidak dapat ditawar-tawar. Setiap tahun, ribuan kecelakaan kerja terjadi akibat
Tantangan Logistik Modern dan Pentingnya Alat Angkat yang Aman Industri logistik Indonesia terus berkembang pesat seiring dengan pertumbuhan e-commerce dan perdagangan global. Namun, di balik
Kecelakaan kerja di sektor industri lifting dan rigging masih menjadi momok yang menghantui pekerja Indonesia. Data menunjukkan bahwa mayoritas insiden terjadi akibat penggunaan peralatan pengangkat
Kecelakaan kerja akibat penggunaan alat angkat yang tidak tepat masih kerap terjadi di berbagai industri. Salah satu penyebab utamanya adalah ketidakpahaman terhadap cara penggunaan webbing